Cope With Conveyor Belt Slippage On Starter Assembly Line

The automated starter assembly line is widely used in agriculture, transportation, trade, medical treatment, services and households. It is an important equipment responsible for the transportation of raw materials. Its normal operation is the key to the stability of the transportation system, which directly affects the entire system. The safety and production efficiency of the production line, because the automated assembly line will have such failures for a long time, so daily maintenance is also important, so how to deal with these failures?

During the operation of the automated assembly line, the reasons for the conveyor belt slippage and the solutions are as follows:

1. Too fast start-up speed can also cause slippage. At this time, it can be started slowly. If a squirrel cage motor is used, it can be started after two jogs, which can also effectively overcome the slipping phenomenon.

2. If the load of the conveyor belt is too large, it will slip if it exceeds the motor capacity. The advantage of slip at this time is to protect the motor. Otherwise, the motor will be burnt after a long time. But for operation, it is a slip accident.

3. The initial tension is too small. Insufficient tension at the conveyor belt leaving the roller causes the conveyor belt to slip. This situation generally occurs at startup.

4. The friction between the driving roller and the conveyor belt is not enough to cause slipping. The reason for the rejection is mostly water on the conveyor belt or damp environment.