Configurations Of The Turning Conveyor On The Axle Assembly Line

In addition to the purpose of using the axle assembly line turning conveyor, the conveying equipment and assembly line need to be specifically designed according to the specific conditions when using the turning, lifting and other device functions. Also consider safe operation and structural reliability for long-term use. So what are the configurations of the turning conveyor on the production line? The following is shared by professionals:

Electronic product production line

The turning conveyor of the production line needs to change the conveying and running direction, because of the factors such as process and site in the assembly line system. Therefore, turning conveyors of various structure types are needed. The most commonly used turning devices of conveying equipment in the assembly line include turning roller conveyors, turning belt conveyors, turning chain conveyors, corner mechanism rotating tables, translation carts, jacking translation transitions, and so on.

1. Roller-type turning conveyor

Roller turning conveyor

The structure is simple, and the turning roller conveyor is the most commonly used conveying equipment to realize the horizontal turning of the conveyor line or the turning of the slope. The price is low, and there are two drive modes: hand push or motor drive; the frame has three types of stainless steel, carbon steel, and aluminum; the rollers are all conical rollers, and the angle needs to be designed according to the turning radius and the width of the conveyor line; The surface of the drum is galvanized with carbon steel, coated with rubber, polyurethane, etc., or materials with craft pallets. The turning roller conveyor is suitable for conveying workpieces with a flat bottom.

2. Belt line turning conveyor

Belt type turning conveyor

The motor drives the roller to drive the belt line to run. The turning belt conveyor uses tapered rollers at both ends and a series of limit angle roller groups on the assembly line to limit the conveyor belt guide bar to run within the track. Therefore, under normal circumstances, it runs synchronously with the linear belt conveyor. It is suitable for conveying lighter materials, and the turning belt conveyor needs an independent driving device. Irregular shapes can also be conveyed, but the size of the material needs to be larger than the gap size of the transition section. If the material is small and needs to be transported, the transition between the two conveyor lines can be designed with a height difference and staggered arrangement, but the material must be able to accept a fall.

3. Rotating table of corner mechanism

On the platform mechanism, roller conveyors, belts, double-speed chains, plate chains and other conventional conveyors can be set. The rotating table of the angle mechanism actually rotates a platform mechanism at a certain angle. Then rotate the turntable along the center of rotation in several ways. The power of the rotating table of the angle mechanism generally has a cylinder or a motor to push the rack and pinion, the motor is driven by the transmission pair, and the motor drives a corner of the rotating table.