Automatic Assembly Line Management and Maintenance

The scope of pipeline application, it is the main material that can form a material transfer process between certain transportation, loading and unloading from the supply point to point, which can create a more rhythmic pipeline operation. This is usually the application range of underground mine tunnels and ground transportation systems, so that it can form a space transportation route, the route is usually fixed, and it is also very easy to use.

Production management of Automatic Assembly Line is impossible to manage traffic less. The application and maintenance of conveyor in Shenzhen assembly line are described below-belt conveyor.

First, explain what a belt conveyor is. It is a continuous transportation. Its characteristic is to form a loading point. We can point to continuous transportation between loads. This is based on the principle of friction transmission. It is more suitable for transporting powder, granular or small pieces of materials and packaging materials.

Mechanical assembly line production management is the most important maintenance technique, and then what maintenance technique does it do? Its main role maintenance technique is usually in two aspects, one is its startup and shutdown, the other is to detect and eliminate belt conveyor failure.

The first is its start and stop, which is the general conclusion of lack of commodity launch. If you are installing several continuous belt conveyors can be used to start the locking device, so you can operate it easily. Further, in order to prevent accidents, each conveyor must have a start or stop button.

Second, it is the discovery and treatment failure, mainly to ensure that the continuous conveyor belt can pass, which requires timely inspection and troubleshooting. Any abnormal situation should be dealt with in time. The employee responsible for the inspection must be inspected regularly, but the inspection is also in place, with any possibility of a small oversight. Many small businesses fail to pay attention and can cause great losses. So be sure to check the knowledge training of operators and personnel to operate and maintain conveyors.

Introduction and characteristics of unpowered roller conveyor:

Introduction to the assembly line: Unpowered roller conveyor, also called roller. There are two types of long and short rollers. There are several orders of cylindrical, conical and curved rollers with long surface shapes. Cylindrical rollers are very widely used. The roller curve section uses double cylindrical or conical rollers to transfer items. Short rollers can shorten the distance between rollers and lighter weight. Road rollers generally tend to be slightly inclined. When the goods are heavier on the Shenzhen assembly line, the time and effort are to promote the goods, and the slope is one to 1.5%. To make the article slide, the slope can be increased to 2 to 3%. There are many factors that affect the magnitude of self-landslides, and the appropriate angle is mainly determined through experiments. When the length of the line is less than 10 meters, when the article is lighter than 200 kg, it can be arranged on the horizontal line. Because the sliding wheel item is difficult to control the speed of descent, the length is usually relatively small. Roll width is 100-150 mm for items. The curve section with the smallest radius of curvature is 3 to 4 times the width of the roller. The length of the cargo transportation roller pitch is 1/3-1/4, when the article transportation needs a higher smoothness. The length should be 1/4 to 1/5 of the pitch of the conveyed goods. The diameter of the roll depends on the size of the load.

Features of unpowered roller conveyor:

The unpowered roller conveyor is easy to integrate filters, and can be used in the complex logistics Shenzhen assembly line transportation system composed of multiple roller lines and other transportation equipment or planes to fulfill a wide range of technical requirements. Accumulation can be used to realize the accumulation of material conveying rollers. The roller conveyor has simple structure, high reliability and convenient maintenance.

Size: The roller conveyor is within the width specified by the customer. According to the customer's needs, the bending roller line is in the standard turning radius of 300, 600, 900 mm, etc., and customers can also use other special needs. Drum roller linear sections use diameters of 38, 50, 60, 76, 89 mm, etc. We will design the taper of the turning roller according to the weight, overall dimensions and linear speed of the conveying object.